JB-6500A
Number of cavities: 6 cavities
Bottle blowing capacity: 100-800ml
Blowing height: ≤245mm
Blowing diameter: ≤80mm
Blowing output: 6000-6500 bottles/hour

Main features of the equipment:
1. High safety factor: there are no hidden dangers of personal injury, avoiding the danger of semi-automatically taking bottles manually, reducing losses caused by accidents, and improving production efficiency.
2. High-speed and high-efficiency: A new model is equivalent to the efficiency of the original 6 semi-automatic machines.
3. Labor saving: single machine operation or multiple machines at the same time, saving 3 to 4 times the labor force.
4. Stable performance: Imported touch screen type man-machine interface computer is adopted, which is accurate, fast and stable. The structure is simple, and the main body of the oven is integrated with a slideway, which is convenient for maintenance.
5. The infrared lamp tube is used for heating, with strong penetrating power and uniform heating. A reasonable ventilation cooling system can fully ensure the heating of the preform and the stable cooling of the container mouth. PLC separates the temperature control independently, the drying tunnel is designed reasonably, can be turned over, and can be adjusted up and down. The preform heating center distance is small, the heating speed is fast, and the energy saving is 40% compared with the ordinary heating system. The bottle preform enters the oven, and the bottleneck is upward. Due to the efficient oven cooling and ventilation system, the bottleneck and shaft will not overheat the surface of the preform. Even thick preforms and high-productivity products can be cooled well to avoid crystallization.化. In order to ensure the yield rate of bottle blowing, the oven is in a very important position in measuring the performance of the machine. The oven structure of this machine adopts the most advanced infrared radiation heating energy-saving technology in the world, and the temperature control adopts automatic feedback and closed-loop adjustment mode.
6. The detection components are selected from Japan's Mitsubishi Electric, and the strong current control is selected from imported famous products, with reliable performance and accurate response.
7. With automatic alarm, automatic fault detection and judgment kinetic energy.
8. It can store the blowing process parameters of a variety of different bottles. When changing different molds and preforms, they can be directly retrieved from the computer without re-adjusting the data. The operation is very simple.
9. The pneumatic components imported from Germany, Japan and Taiwan are selected to ensure zero failure rate in high-speed operation.
10. With high sensitivity, fast switching speed, low failure rate, safe and reliable operation, the whole machine adopts an ultra-standard anti-vibration overall structure, which minimizes vibration when the machine is running at high speed, greatly extending the use of accessories life.
11. The air circuit design action and blowing are divided into two parts to meet the needs of different air pressures for blowing and actions, and to achieve high-pressure blowing products. Optional high-pressure blowing exhaust recovery system can save 10-15% of the gas source.
12. Adopting double toggle, main link hinge mechanism, strong clamping force, with the function of clamping and pressurizing when high pressure blowing, stable and reliable action.
13. The moving parts of mold opening and closing adopt high-speed linear guide rails, which have the advantages of high wear resistance, high-speed operation of mold opening and closing, light and vibration-free.

Schematic diagram of blowing process
Preform injection molding→machine preform storage part (below automatic)→preform baking (temperature adjustment)→stretch blowing (stretching→mouth blowing→exhaust→mouth and rod simultaneous blowing→closing mouth blowing→setting )→Remove products→Inspect and put into storage.